CAN Gateway Pinout » History » Revision 3
Revision 2 (Adam Klama, 06/27/2024 05:54 AM) → Revision 3/18 (Adam Klama, 06/27/2024 07:28 AM)
# CAN Gateway Pinout |Pin Name | Pin | Pin | Pin Name | |------------|-----|-----|------------| | KL31 GND | 1 | 14 | KL30 IN | | KL15IN | 2 | 15 | KL30B OUT | | AN1/PWR1 | 3 | 16 | WAKEUP | | AN3/PWR2 | 4 | 17 | AN4/PWR3 | | AN5/PWR4 | 5 | 18 | AN6/PWR5 | | AN7 | 6 | 19 | AN8 | | AN9/FREQ1 | 7 | 20 | AN10/FREQ2 | | AN11/FREQ3 | 8 | 21 | AN12/FREQ4 | | sGND | 9 | 22 | SENSOR5V | | CAN1L | 10 | 23 | CAN1H | | CAN2L | 11 | 24 | CAN2H | | CAN3L | 12 | 25 | CAN3H | | CAN4L | 13 | 26 | CAN4H | # Pin description Terminal names starting with KL are names according to DIN 72552 ## KL31 KL31 - return to battery- or chassis ground. This pin should be connected with wire of at least 1.5mm2 ## KL30 IN KL30 - constant battery+ This device is optimized for low power consumption in standby - 0.5mA - it is strongly recommended to keep this terminal on constant bat+ or delayed off. This pin should be wired wit at least 1.5mm^2 ## KL30B OUT KL30B - delayed off battery+. This pin is intended to power the transmission and is capable of supplying 15A. ## KL15IN KL15 - Battery + through ignition switch. This pin should be connected with wire of 0.35mm2 ## ANx - x between 1 and 8 ANx - Analog input capable of measuring voltages of up to 16V ## ANx - x between 9 and 12 ANx - Analog input capable of measuring voltages of you to 6V ## PWRy - y between 1 and 5 PWR1 - Low current power output capable with current rating of 0.9A ## FREQz - z between 1 and 4 FREQz - Inputs for speed signals