CAN Gateway Pinout » History » Revision 3
« Previous |
Revision 3/18
(diff)
| Next »
Adam Klama, 06/27/2024 07:28 AM
CAN Gateway Pinout¶
| Pin Name | Pin | Pin | Pin Name |
|---|---|---|---|
| KL31 | 1 | 14 | KL30 IN |
| KL15IN | 2 | 15 | KL30B OUT |
| AN1/PWR1 | 3 | 16 | WAKEUP |
| AN3/PWR2 | 4 | 17 | AN4/PWR3 |
| AN5/PWR4 | 5 | 18 | AN6/PWR5 |
| AN7 | 6 | 19 | AN8 |
| AN9/FREQ1 | 7 | 20 | AN10/FREQ2 |
| AN11/FREQ3 | 8 | 21 | AN12/FREQ4 |
| sGND | 9 | 22 | SENSOR5V |
| CAN1L | 10 | 23 | CAN1H |
| CAN2L | 11 | 24 | CAN2H |
| CAN3L | 12 | 25 | CAN3H |
| CAN4L | 13 | 26 | CAN4H |
Pin description¶
Terminal names starting with KL are names according to DIN 72552
KL31¶
KL31 - return to battery- or chassis ground. This pin should be connected with wire of at least 1.5mm2
KL30 IN¶
KL30 - constant battery+ This device is optimized for low power consumption in standby - 0.5mA - it is strongly recommended to keep this terminal on constant bat+ or delayed off.
This pin should be wired wit at least 1.5mm^2
KL30B OUT¶
KL30B - delayed off battery+. This pin is intended to power the transmission and is capable of supplying 15A.
KL15IN¶
KL15 - Battery + through ignition switch. This pin should be connected with wire of 0.35mm2
ANx - x between 1 and 8¶
ANx - Analog input capable of measuring voltages of up to 16V
ANx - x between 9 and 12¶
ANx - Analog input capable of measuring voltages of you to 6V
PWRy - y between 1 and 5¶
PWR1 - Low current power output capable with current rating of 0.9A
FREQz - z between 1 and 4¶
FREQz - Inputs for speed signals
Updated by Adam Klama over 1 year ago · 18 revisions